top of page

Novice Karate Group (ages 8 & up)

Public·67 members

Samsung J7 Prime Duos Sm G610yds Stock Firmware Ph 04 04 17 Zip


Samsung J7 Prime Duos SM-G610YDS Stock Firmware PH 04 04 17 Zip




If you are looking for the official stock firmware for your Samsung Galaxy J7 Prime Duos SM-G610YDS, you have come to the right place. In this article, we will show you how to download and install the latest firmware update for your device. This firmware is based on Android 8.0 Oreo and has the build number G610YDSU2CRK1. It was released for the Philippines region on April 4, 2017.


DOWNLOAD: https://t.co/vvoP2VE6un


Flashing the stock firmware on your Samsung Galaxy J7 Prime Duos SM-G610YDS can help you to fix various issues such as bootloop, soft brick, battery drain, lag, etc. It can also restore your device to its factory settings and remove any custom ROMs or mods that you have installed. Before you proceed, make sure that you have backed up your important data and fully charged your battery. You will also need a Windows PC, a USB cable, and the following files:



  • Samsung USB Drivers: [Download]



  • Odin Flash Tool: [Download]



  • Samsung Galaxy J7 Prime Duos SM-G610YDS Stock Firmware PH 04 04 17 Zip: [Download]




Once you have downloaded the files, follow these steps to flash the stock firmware on your Samsung Galaxy J7 Prime Duos SM-G610YDS:



  • Extract the Samsung Galaxy J7 Prime Duos SM-G610YDS Stock Firmware PH 04 04 17 Zip file to get the .tar.md5 file.



  • Install the Samsung USB Drivers on your PC.



  • Run the Odin Flash Tool as administrator.



  • Turn off your Samsung Galaxy J7 Prime Duos SM-G610YDS and boot it into Download Mode by pressing and holding the Volume Down + Home + Power buttons together for a few seconds. Release the buttons when you see a warning screen and press the Volume Up button to confirm.



  • Connect your Samsung Galaxy J7 Prime Duos SM-G610YDS to your PC using a USB cable. Odin should recognize your device and show a blue or green box with a COM port number.



  • Click on the AP button in Odin and browse for the .tar.md5 file that you extracted earlier.



  • Make sure that only Auto Reboot and F. Reset Time are checked in the Options tab of Odin.



  • Click on the Start button in Odin to begin the flashing process. Do not disconnect your device or interrupt the process until it is finished.



  • Once the flashing is completed, Odin will show a green PASS message and your device will reboot automatically.



  • Disconnect your device from your PC and wait for it to boot up normally.




Congratulations! You have successfully flashed the Samsung Galaxy J7 Prime Duos SM-G610YDS Stock Firmware PH 04 04 17 Zip on your device. You can now enjoy the latest features and security patches of Android 8.0 Oreo on your Samsung Galaxy J7 Prime Duos SM-G610YDS. If you have any questions or problems, feel free to leave a comment below.






About

Welcome to the group! You can connect with other members, ge...
bottom of page